Telescopic Boom Lift ZT42J Zoomline

The ZT42J Zoomlion telescopic lift is a diesel self-propelled lift with a lifting capacity of 300/454 kg and a working height of 44.08 meters.

ZT42J Zoomlion telescopic lift is a modern modular design, low self-weight, large load capacity - 300 kg / 454 kg, working height 44.08 m, working radius - 25 m, high reliability and intelligent control.

ZT42J Zoomlion Lift new development of the Zoomlion Concern, it has a greater working height and load capacity than its counterparts.

Smooth and stable boom extension, the telescopic efficiency is increased by 30% compared to the two-cylinder telescopic boom.
The new creative design of the boom effectively reduces its weight and increases stability, and generally improves the stability of the ZT42J lift. A stable and reliable telescopic device.
Boom extension system with lower attachment design, significantly reduce the lateral deflection of the boom.
The jib turn function allows for more flexible movements and a greater operating range of the lifter.

The ZT42J Zoomlion telescopic lift is equipped with a PLC control system and CAN-Bus communication technology. The automatic fault detection function provides the most convenient service.
The retractable engine tray makes regular maintenance even more convenient.

The ZT42J Zoomlion has a four-wheel drive system, which significantly improves off-road performance. Off-road chassis with swinging axle function, make it easy to overcome the 45% rise. Effective prevention of excessive tire wear.
Creative function of telescopic outriggers.

The ZT42J lift is ideal for construction and industrial applications, and is particularly useful when performing high-rise work in confined spaces.

ZT42J Zoomlion telescopic lift has excellent performance, stable operation and can withstand heavy load on the platform. The spacious working platform 2.44 x 0.91 m allows you to comfortably perform various types of work at a considerable height.

The wide model range of telescopic lifts manufactured by ZOOMLION Corporation allows you to choose a lift with any range of working heights.

ZT42J Zoomlion lift with telescopic boom, greatly improves the efficiency of high-altitude work.

Model ZT42J Maximum working height 44.08 m Maximum lifting height of the platform 42.08 m Maximum working radius 25 m Platform length - D 2.44 m Platform width - E 0.91 m Total height (folded) - C 3 m Total Length (folded) - A 13 m Total width (folded) - B 2.49 m Wheelbase - F 3.81 m Ground clearance (center) - G 0.41 m Load capacity (unlimited / limited) 300 / 454 kg Driving speed 5.2 km/h Turning radius internal / external 3.3 / 8.2 m Rotary support device 360° (continuous) Platform rotation ±90° Gradeability (folded) 45% (24°) Jib (range of articulation) 130° (-55° -75°) Max. working slope 3° Max. wind speed 12.5 m/s Diesel engine Cummins, Kubota Fuel tank capacity 200 l Hydraulic tank capacity 250 l Drive 4WD Steering mode Front wheels/ Rear wheels/ Crab Voltage 12 V Tires IN445/50D710 Weight 21 900 kg

Standard features of the ZT42J telescopic lift

• All motion alarm.
• Proportional control.
• Control of the lift movement.
• Auto-leveling system.
• Emergency stop button.
• Tilt protection system.
• Emergency descent system.
• On-board diagnostic system.
• 4.3-inch display.
• Load sensing system.
• Easy-to-use platform.
• Self-closing entry gate.
• Oscillating axle.
• Swing-out engine tray.
• Flashing amber beacon.
• Horn.

Accessories and Options - ZT42J telescopic lift
 Platform work lights.
 AC power to platform.
 Anti-collision device.
 Outrigger in-situ telescopic function.

You can buy a Zoomlion lift model ZT42J or get advice by calling: (044) 502-67-23 or by sending a request RIGHT NOW by filling out the form below.